Products
| Transmitters
| Receivers
| Monitors/Displays
| Boosters/Couplers
| Pricing
| Go Back |
|
|
Transmitters
|
|
|
The Thief Alert, Model TA-1 is a clever device for protecting against theft of
electronic equipment such as Computers (PCs, Macs, Notebooks), TVs, VCRs, Stereos, Fax
Machines, Lab Equipment, etc.,that is intended to remain plugged into an electrical power outlet.
Works with all Receivers, Monitors, and Display Panels from the "No New Wiring"
product range.
Click for details 
Thief Alert
|
|
|
|
|
The Armed Outlet Box, Model TA-OB(series) is a standard electrical
outlet box which is prewired with equivalent Thief Alerts. Each box provides
multiple sockets for the protection of many items of electronic equipment that are contained
in a single room or location. Works with all Receivers, Monitors, and Display Panels from the
"No New Wiring" product range.
|
|
|
|
|
The Armed Power Strip, Model TX-PSF(series) is a standard electrical power strip
that is prewired with equivalent Thief Alerts to provide multiple sockets for the protection
of many items of electronic equipment that are contained in a single room or location.
Works with all Receivers, Monitors, and Display Panels from the
"No New Wiring" product range.
|
|
|
|
|
The Mini-Transmitter, Model TA-Mini(series) is a miniaturized transmitter
intended for hard-wire installations with 120 volt Smoke Detectors or other such Detectors.
It will transmit a signal in case of alarm.
Works with all Receivers, Monitors, and Display Panels from the
"No New Wiring" product range.
|
|
|
|
|
The Plug-in Transmitter, TA-PIT(series) is a plug-in transmitter
that can be triggered from a contact or loop closure, contact or loop opening,
or a voltage source (AC or DC). Works with all Receivers, Monitors, and Display Panels from
the "No New Wiring" product range.
|
|
|
|
|
The Smoke Alarm Module, Model NNW-SAM is a miniaturized transmitter
intended for hard-wire installations with 120 volt Smoke Detectors
to transmit a signal in case of alarm or disconnection. Works with all Receivers, Monitors, and
Display Panels from the "No New Wiring" product range.
|
|
|
|
|
The Push-Button Transmitter, Model NNW-PBT is a plug-in transmitter with
push-button activation, that is intended for use in Panic or Emergency reporting as well
as for paging. Attractively styled for desk or tabletop use, the unit is even small enough
to be concealed under a desk or table if so desired. Works with all Receivers, Monitors, and
Display Panels from the "No New Wiring" product range.
|
|
|
|
|
The Transmitter with DC Voltage Output,
Model NNW-TDC is a plug-in unit that,
provides the transmitter function when triggered as well as continuously supplying a +12 volt
DC output to power such devices as PIR Detectors, Motion Detectors, etc.
Works with all Receivers, Monitors, and
Display Panels from the "No New Wiring" product range.
|
|
Receivers
|
|
|
The Buzzer Module, Model NNW-BZM is a self-contained, single channel plug-in
Receiver, that emits a loud (90db) "beeping" sound when activated.
Works with all Transmitters from the "No New Wiring" product range.
|
|
|
|
|
The Contact Closure Module, Model NNW-CCO is a single channel plug-in Receiver,
that provides a set of isolated Relay contacts (Form C) that switch when activated.
Works with all "No New Wiring" Transmitters.
|
|
|
|
|
The Remote Alarm Module, Model NNW-RAM is a single channel plug-in Receiver,
that provides a 120 volt AC socket that switches ON/LIVE when the unit is activated.
This module, once activated, could be used to turn on a light, siren, radio or other appliance.
Works with all "No New Wiring" Transmitters.
|
|
|
|
|
The Remote Control Module, Model NNW-RCM is a single channel miniaturized Receiver,
designed for hard wire applications, provides an isolated Relay output (Form C)
that switches when the unit is activated. Works with all "No New Wiring" Transmitters.
|
|
|
|
The Smoke Detector Trigger Module, Model NNW-SDT is a single channel miniaturized
Receiver, designed for hard wire applications with a ADA compliant Smoke Detector, provides
a +9 volt trigger when the unit is activated. Works with all "No New Wiring" Transmitters.
|
|
|
|
|
The Flasher Module, Model NNW-FLS is a single channel miniaturized Receiver,
designed for hard wire applications with emergency Signs, provides an isolated Relay output
(Form C) that switch at a one second rate when the unit is activated. Works with all
"No New Wiring" Transmitters.
|
Monitors &
Display Panels
|
|
|
The Alarm Display Panel, Model NNW-ADP(series) is a multiple channel (zone) receiver
that monitors and annunciates all Transmitter location codes (DIP switch settings) with numerical
displays. Latching unit must be manually reset. Works with all "No New Wiring"
Transmitters.
|
|
|
|
|
The Desk Monitor Panel, Model NNW-MTS (series) is a multiple channel (zone)
receiver that monitors and annunciates all Transmitter location codes (DIP switch settings) with
LED indicator lights. Works with all"No New Wiring" Transmitters.
|
|
|
|
|
The Wall Monitor Panel, Model NNW-MTW(series) is a multiple channel
(zone) receiver that monitors an annunciates all Transmitter location codes (DIP switch
settings) with LED indicator lights. Works with all "No New Wiring" Transmitters.
|
|
Boosters/Couplers
|
|
|
The Signal Booster Module, Model NNW-BST is a miniaturized module for use in
installations where the combination of high current loads and long distances may
reduce the signals to below acceptable levels. This unit is available for plug-in or hard wire
installations.
Click for details Signal Booster Module
|
|
|
|
|
The 3-Phase Coupler-Repeater, Model NNW-3 is required in installations
that have a 3-phase power distribution system (120V/208V). This will include
most commercial and industrial facilities.
Click for details
3-Phase Coupler-Repeater
|
|
|
|
|
The Transformer Coupler-Repeater, Model NNW-CPR1 is required in
installations that have more than one power transformer, or
an auxiliary or emergency power source.
Click for details
Transformer Coupler-Repeater
|
|
Under Construction 